GreaseShield® GS1850-LL-F (Defender)

Approvals

ASME A112.14.3-2000 Testing of Grease Interceptors, ASME A112.14.4-2001 Grease Removal Devices, CSA B481.0-2012 Testing of Grease Interceptors, CSA B481.1-2012 Testing and Rating of Grease Interceptors using Lard, CSA B481.5-2012 Testing and Rating of Grease Interceptors Equipped with a Grease Removal Device & PDI G 101. UL Approved (File No: E361705). Machinery Directive 2006/42/EC and EMC directive 2004/108/EC.

Flow Rates

Passive PDI =7GPM/26.5 L/m

Pro Active= 2.0 L/S

Application

10 / 20 Grid Ovens with Low Level Discharge and Pot Sinks / Pre-Rinse Sink. Do not exceed rated inflows.

Functions & Features

• PreFilter
• Genie H2O Heater On Demand System -Supplied as standard (2509P01)
• 24 Volt PLC 4 Way - Controls both main and LL tank operation
• LL Tank Filter built in for LL Inlet - Ensure ovens are plumbed into the LL inlet and sink into the FilterShield inlet
• Solenoid Valve WRAS approved (or similar approval) Solenoid
• Anti-Flood Pump - To maintain normal water level + recalibration feature
• Anti-Flood Sensor included

Parts Supplied as Standard

• Running Trap – 54mm Running trap fitted on outlet as standard.
• FlexiPlumb:-54mm Running trap (0635D04-54), 54mm 90° bend (0635P02-54), 40mm 90° bend (0635P02-40) x2, 40mm straight (90635P01), 34mm 90° (0635P02-34)
• 40mm Blanking Cap (0635D10-40) x2
• Key (0509P86)
• Braided Hose For Hot Water (0214P01) x 2 as part of Genie H2O
• Plumbing Pack-see Note

Default Program

(V1.0 1850-LL)

Start 7.00 Am, Stop 02.30 Am. FOG & Auger pulsing 5 Min On 5 min off. An anti-Flood and Recalibration cycle, when water intake is activated FOG roller is inhibited. Mains lead per country.

Installation Kit

• Defender Stand to be utilised with GreaseShield® Unit at floor level
• IP56 Socket. Best Practice Management and Do’s and Don'ts, both laminated to be displayed on site.
• Daily Maintenance Logbook (12 months)
• Sampling Point